1. Remove the plastic cone from the extention pole by pressing the silver buttons and pulling. Insert the grid wiping tool into the end of the extension pole.

2. Remove retaining pin from tool. Secure tool onto the pole by inserting the retaining pin into the hole on pole. (You may need to tap lightly with a hammer.)

3. Start wiping at edge of grid using the end of the sponge as shown above. Then gently pull the extension pole towards you approximately two feet.

4. Using the opposite end of the sponge, let it rotate along the grid while slowly walking backwards.

5. Continue to let the sponge rotate until the entire surface of the sponge is soiled.

6. To rinse the sponge, push it to the lower rack of the rinsing tool. Apply pressure to squeeze out dirt. Release and then wring out excess water by placing on the upper rack of rinsing tool and applying pressure.

Manufactured by International Ceiling and Wall Cleaning.